[96KHz] Mesa Boogie Badlander Rectifier 100W EL34 (send 22.903 dBu / return 13.303 dBu) - SignalArt reamp

Amp Head Capture

NAM

2dor

4 months ago

Description

If you like my work & want to support it, you can do so here: https://paypal.me/2dorNAM 96 KHz profiles of the Mesa Boogie Badlander Rectifier 100W (EL34). Reamped using the new methodology Steve published: https://neural-amp-modeler.readthedocs.io/en/latest/tutorials/calibration.html • SEND level: 22.903 dBu (10.82 V) • RETURN level: 13.303 dBu Trained with NAM-HD: https://github.com/honkkis/neural-amp-modeler-HD No need to worry about the above values (SEND / RETURN) anymore - just use NAM plugin v0.7.12 (or later) with the "Calibrate Input" feature. Key in your input headroom / maximum input gain inside the "Calibrate Input" textbox and the NAM plugin will do all the math to get profiles to behave as if you were plugging into the real gear itself. Reamp chain details: -------------------- • RME Fireface UCX II -> SignalArt reamp box -> Mesa Badlander 100W -> St.Rock React:IR II -> RME Fireface UCX II Additional details: ------------------- • includes 48 direct profiles (full AMP head only) included at various settings • Legendary Tones Mr. Scary Mod included • Mix of my own settings, settings from the Mesa manual as well as from other artists (Mark Morton, Ola), YouTubers (Kyle Bull, Blake Mansfield) and some forum folks (PaisleyWookiee). • A spreadsheet / guide to understanding how each profile was dialed & the source of inspiration: https://mega.nz/file/GkgiVKLA#B9a9PeMYsqag5CqT2-TpaX4O19_dNggcaDQSwee4U8g • AMP (full amp head) profiles are direct -> use an IR of your choice • All profiles are trained at 96 KHz - they will NOT run on the Dimehead NAM player • ESR graphs available here (most are below the established "Great" accuracy threshold; the rest are as close as the STANDARD NAM architecture for 96 KHz allows it to be): https://mega.nz/folder/rwpjFRbZ#zQgecoUygM0kEidRLWt2PQ • The leading "S-" in the profile name indicates the "Signal Art" reamp box was used !!! ATTENTION, NERDS !!! (yes, that's YOU if you've made it this far): ---------------------------------------------------------------------- • Use the [CabMatch] impulse responses I included to adjust the frequency response of the profiles to my Mesa 2x12, Mesa 4x12 or both of them hooked up to the Badlander • You still need a regular speaker IR after these • These IRs cover all power ratings (20W, 50W and 100W) across both BOLD and VARIAC modes • To those familiar with the Fractal units, this is somewhat similar to adjusting the "Speaker Impedance Curve" in the AMP block.

Makes and Models

Mesa Boogie Badlander Rectifier 100W EL34

[96KHz] Mesa Boogie Badlander Rectifier 100W EL34 (send 22.903 dBu / return 13.303 dBu) - SignalArt reamp

Use Your Tones