JHS @ Andy Timmons

Description

This capture set mainly contains captures of the JHS Andy Timmons signature distortion pedal in isolation with a couple settings that I saw Andy use. The 100W (switch in the middle) was used exclusively, drive was set to about 1 o'clock and EQ and Air where somewhere between 9:30 (dark) and 12 o'clock (bright). Andy's main setting is around 11 o'clock for both of these controls. I also included a couple of captures where I've put the JHS AT pedal in front of my Rivera M100. It's not a Mesa/Boogie Lonestar, but it's still an EL34 amp with a blackfaceish clean channel. The nomenclature is structured as follows: C = Complex Architecture (My usual Hyper Accuracy Training) S = Standard Architecture (Tone3000 Default) XS = xSTD Architecture (Andrey's Standard Architecture) All the complex captures were trained with 1400 epochs, all the standard captures were trained with 1000 epochs on tone3000. Signal Chain: UA Apollo X8 -> Lehle P-Split III Reamp Box -> JHS @ (it stops here for the pedal only captures) -> Rivera M100 -> Suhr Reactive Load Signal Chain Calibration: +12.4 dBu (Calibration Metadata Included)

Makes and Models

Tags