Marshall JCM800 Zakk Wyle Signature Edition (0.5.2)

Description

Arlington Audio - Neural Amp Modeler pack ------------------------------------------ Created with trainer version 0.5.2. Normalization is supported. Marshall JCM800 Zakk Wylde Signature Edition The quintessential JCM sound fitted with 6550 (Kind of like KT88) tubes in the power section. I've kept this one as honest as possible, The 800's aren't exactly a high gain amp but with the right boosts, they RIP! Interestingly, I chose these settings based on how I felt the amp sounded and what my usual dialling in procedure dictated, it landed on almost identical settings to what Dave Mustaine/Megadeth would typically dial in without referencing them! Gain 8 on the high sensitivity channel would pretty much give you a late 80's MD tone without much effort. Though if you're after sparkly Marshall tones, this is your guy on the low sensitivity channel. It's a bit of an oddball amp that takes a little nuance to understand but you know you got it when it starts to roar. Technical details: Trainer Version: 0.5.2 / v1.1.1 Captures: 38 @ 1000 Epochs per capture. Amp: Marshall JCM800 Zakk Wylde Signature Edition Output Tube Types: 6550 Channels: High and Low sensitivity Peak: ~3.5db (average) Load Box: Suhr Reactive Load Interface: RME Fireface UFXII Preamp: Golden Age Pre73 MKIII Reamp Box: Radial Pro RMP (Level modified) Referenced with Event Opal monitors, Sonarworks and Jens Bogren impulse responses (not included) -------------------------------------------------------------- Low Sensitivity: Bass: 4 - Mids: 10 - Treble: 6.9 - Presence: 7.1 - Master: 8.1 -------------------------------------------------------------- High Sensitivity: Bass: Max - Mids: 4 - Treble: 5 - Presence: 7 - Master: 5.9 Stuff people have requested: -10dBFS sine tone at 400Hz from DAW -> AC RMS reading of **2.15v** at the 1/4" plug after reamp box. 10^(-10/20) = 0.3162 **2.15**/0.3162 = 6.799 20log(6.799/0.775) = **18.86 dBu** If your interface has 12dBu instrument inputs: 18.86-12 = 6.86, you have to LOWER the input in NAM Plugin to -6.86 dB for the capture to sound correct. While I offer my libraries for free, donations would be appreciated and will go towards expanding this library 🥹 https://paypal.me/arlingtonaudio 🥹

Makes and Models

Tags

Models

Each model captures the gear at specific settings.